Parameter

 TuningHost
Boost Stage 1: 1850 mBar; Stage 2: 2300 mBar
Maximum RPM 7350-7500 RPM
Throttle Response Linear throttle in Pedal Box mode
Catalytic Converters Proper deactivation incl. limp mode in Cat mode
OPF Proper deactivation incl. limp mode and regeneration in OPF mode
Cylinder Deactivation Off in FEM (Full Engine Mode)
Fuel Type Selection E85, Low Octane, High Octane
Anti-theft Mode With UDS & CCP deactivation + 32-bit security code with Brute Force protection
Exhaust Sound Customizable (OEM-style Burble, PopBang), Quiet Start, Hard Cut, Exhaust Valves Control
Speed Limiter Removed in Stage 1 and Stage 2 modes
100–200 kph Acceleration 6.3-6.4 s @ 2300 mBar on E85 (altitude 720 m), 6.8 s @ 2300 mBar in High Octane mode
Torque Stage 1: 850 Nm Stage 2: 1000 Nm (Pump gas and E85)
Power Stage 1: 580hp Stage 2: 600hp Stage2 + E85: 660 hp (640hp from 4200 RPM)
IAT Cooling Pump Adjusted in Stage1 and Stage2 modes
Start/Stop Logic Inverted in Start/Stop mode
AFR at full load (WOT) Normal Exhaust Temperature: 0.82 High Exhaust Temperature: 0.80 
The Multimap firmware features the following modes, which you can control via our mobile app:
POWER:
Stock
Stage1 (Boost: 1.8bar or 26psi)
Stage1+ (Boost: 2.3bar or 33psi)
Pedal Box
SOUND:
Quiet Start
Hard Cut
Sound Tuning (Adjustable Burble/Pop&Bang) 
Exhaust Flap
FUEL:
Low Octane
High Octane
E85 Mode
LAUNCH:
Anti-theft
Valet (100kph / 0.6 bar of boost)
Start/Stop
ECO:
Cat Off
OPF Off
Half/Full Engine Mode

4 bar MAP Sensors: 4 pcs
Total: 
1990€ via Bank Transfer
2100€ via PayPal

Dyno: 150€ (if required)